Zhangqiu Yulong Machine Co., Ltd.

Feed Pellet Mill (CE approved)

Feed Pellet Mill (CE approved)
Product Detailed

(CE)feed pellet mill
-pellet mill make 2-10mm poultry feed pellet
-pellet mill high capacity,low consumption
-with condition

I. Introduction

1. Raw materials will be pressed :

The agricultural straw, grain, sorghum, maize, bean , wheat, or waste, dry plant leaves, and so on. It is granulation of materials such as various feedstuff for livestock,cow, horse, poultry and aquatic products, grassmeal,etc.

2. Working introduction:

HKJ250,HKJ300,HKJ350,HKJ450,HKJ610 are professional feed pellet mills. If u want to press 8mm feeds,We will install a 8mm hole ring die inside, the machine can make 1.5-12mm diameter feed pellets just by changing the die inside the machine. The material is put into screw feeder, then through adjusting speed-adjusting motor to change speed, getting proper material flow, goes into adjustor through oar rod’s stirring. with steam to conditioning material, after conditioning, the material temperature can reach 64-85 °C and moisture can reach 13-15%, then through outlet and goes into pressing store. Key spare parts are made by CNC system, which can ensure machine high precision and quality.

3. Working efficiency:

All feed machine can be with steam and without steam . difference as follows:

With steam : (1).materials with 0.1-0.4MPa steam will be more easily cured, pellets surface is more smooth and bright, higher density. (2).materials with steam will be easily soft and easily pressed. It will be helpful to reduce mould friction, enlarge its lifetime. (3).with steam, soft materials are 1/4 more capacity

Without steam:  (1). by pressing process, temperature can reach cure degree too, but pellets surface is not so smooth and bright. (2). materials without steam needs time to be soft, during pressing process, more friction between roller and die. In this case, lower capacity too.

Note : if materials contain much protein and glucose, easily to press, there is no need to press pellets with steam. It mostly depends on materials characteristic.

II. Technology parameter

 Model

HKJ 250

HKJ 300

HKJ 350

HKJ 450

HKJ610

 Capacity (t/h)

0.5-1.5

1-3

2-5

3-6

4-8

 Power of main motor(kw)

22

37-45

2×30(55)

45×2

55×2

 Power of feeder(kw)

0.55

0.75

0.75

1.5

1.5

 Power of conditioner(kw)

2.2

2.2

3

3×2

3×2

Inner diameter of die(mm)

Φ250

Φ300

Φ350

Φ450

Φ610

 Rotate speed of die(rpm)

638

446

446

446

398

 Quantity of rollers

2

2

2

2

2

 Out diameter of roller(mm)

Φ103

Φ132

Φ160

Φ210

Φ248

 Rotate speed of feeder(r/min)

12--120

 Rotate speed of modulator(r/min)

360

 Pellet spec(mm0

Φ1.5 ,Φ2,Φ2.5,Φ3,Φ3.5,Φ4,Φ4.5,

Φ5,Φ6,Φ8,Φ10,Φ12

 

 

 Pressure of steam(Mpa0

0.1-0.4

 Steam using(t/h)

≥0.1-0.3

Temperature of steam(°C)

130~150

 

Contact: Ruby Shao

Mob: 0086-15054165565

 

 



Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.